Xerox DocuPrint N24 System Administrator Manual page 325

1
Replace the controller board and tighten
the thumbscrews by hand.
2
Reattach the GFI power cord to the
printer. Reattach any cables to printer
ports.
3
Power ON the printer.
4
Print a Configuration Sheet. (page 3-85)
and confirm that the proper Network
Interface appears on the sheet.
Appendix C: Installing and Removing Printer Options
Xerox Network Interface Card (XNIC)
If the proper NIC does not appear
on the Configuration Sheet or if an
error message appears, perform
steps 1 through 5 of the next section
"Removing the XNIC". Then
reinstall the NIC and print another
Configuration Sheet. If the proper
NIC still does not appear on the
sheet or the error message is still
present, contact the dealer from
which you bought your printer, or
contact Xerox.
C-55