Table 6.2
Control Panel messages and corrective actions (continued)
Message
R em ov e Out pu t
F ro m Ma ilb ox 7
R em ov e Out pu t
F ro m Ma ilb ox 8
R em ov e Out pu t
F ro m Ma ilb ox 9
R em ov e Out pu t
F ro m Ma ilb ox 1 0
R ep la ce Pr in t
C ar tr id ge
Reset ENV/Bypass
Reset Trays 2,3
R OS T ro ubl e
Power Off/On
Description/Corrective Action
The Mailbox 7 output bin is full. Printing cannot continue.
ACTION:
Remove the output from the Mailbox 7 output bin.
The Mailbox 8 output bin is full. Printing cannot continue.
ACTION:
Remove the output from the Mailbox 8 output bin.
The Mailbox 9 output bin is full. Printing cannot continue.
ACTION:
Remove the output from the Mailbox 9 output bin.
The Mailbox 10 output bin is full. Printing cannot continue.
ACTION:
Remove the output from the Mailbox 10 output bin.
The Toner Cartridge has reached its end of life. Printing cannot resume.
Replace the Toner Cartridge as per the instructions in Appendix
ACTION:
B: Maintaining the Printer.
A jam may have occurred in the Envelope Feeder or Bypass Feeder
ACTION:
Reseat the Envelope Feeder or Bypass Feeder.
A jam may have occurred in the Trays 2 and/or 3.
ACTION:
Reseat the trays.
This message indicates there is a problem with the ROS controlling ASIC.
ACTION:
Power OFF the printer and power it ON again. If the message
appears again, contact your dealer or Xerox.
Control Panel Messages
Table 6.2 Page 19 of 21
Chapter 6: Troubleshooting
6-23