Xerox DocuPrint N24 System Administrator Manual page 186

Downloading Fonts and Macros
<ESC>%-12345X @PJL<CR><LF>
@PJL FSDOWNLOAD FORMAT:BINARY NAME ="0:\pcl\fonts\font1" SIZE=XX<CR><LF>
<binary data><ESC>%-12345X
<ESC>&n6W<HEX'00'>font1<CR,LF>
<ESC>&n6W<HEX'01'>font1<CR,LF>
<ESC>&n6W<HEX'02'>font1<CR,LF>
5-6 DocuPrint N24, N32, and N40 System Administrator Guide
The following is a sequence of commands that can be
sent to the DocuPrint N40 to download a font to the disk.
In this example:
• <ESC>%-12345X is the PJL UEL command which
starts this sequence.
• @PJL<CR><LF> is the mandatory PJL command
following the UEL command.
• @PJL FSDOWNLOAD... downloads a font named
"font1" that is "XX" bytes in size.
• <ESC>%-12345X is the UEL command which ends
this sequence.
Invoking this font requires the following PCL sequence:
Sets the current font ID to the given string ID
"font1"
Associates the current font ID with the string ID
"font1"
Selects the font referred to as "font1" for the
primary font
Notes:
1. The case of the string ID must be the same as the case
of the fontname in the FSDOWNLOAD command.
2. The byte count ("6" in the above example) must
equal the string ID byte count plus 1.