Caution Of The Products Described In This Document - Fujitsu MB95200H Series Operation Manual

Caution of the products described in this document

■ ■ ■ ■
The following precautions apply to the product described in this manual.
WARNING
Electric shock,
Damage
Electric shock,
Damage
CAUTION
Cuts, Damage
Damage
Damage
Damage
Damage
Damage
Damage
Damage
BGM Adaptor MB2146-08-E Operation Manual V1.1
PREFACE
Indicates a potentially hazardous situation which, if not avoided appropriately, could result in
death or serious injury and/or a fault in the user's system
Before performing any operation described in this manual, turn off all the power supplies
to the system. Performing such an operation with the power on may cause an electric
shock or device fault.
Once the product has been turned on, do not touch any metal part of it. Doing so may
cause an electric shock or device fault.
Indicates a potentially hazardous situation which, if not avoided appropriately, may result in
minor or moderate injury and/or damage to the product or the equipment to which the
product is connected, to software resources such as data, or to other properties.
Before moving the product, be sure to turn off all the power supplies and unplug the
cables. Watch your steps when carrying the product. Do not use the product at an
unstable location such as a place exposed to strong vibration or a sloping surface. Doing
so may let the product fall, resulting in an injury or fault.
Neither put anything on nor apply shock to the product. Once the product has been
powered, do not carry it. Doing either may cause a fault due to a load or shock.
Since the product contains many electronic components, keep it away from direct sunlight
high temperature, and high humidity to prevent condensation. Do not use or store the
product where it is exposed to much dust or a strong magnetic or electric field for an
extended period of time.
An adverse operating or storage environment can cause a fault.
Use the product within the ranges of its general specifications.
Operating it outside the range of any general specification may cause a fault.
To prevent electrostatic breakdown, do not let your finger or an object touch any metal part
of the connector. Before handling the product, touch a metal object (such as a door knob) to
discharge static electricity from your body.
Before turning the power on, be sure to finish making all the required connections. To set
up and use the product, follow the instructions given in this document.
Using the product incorrectly or inappropriately may cause a fault.
Before plugging or unplugging any cable for this product, be sure to turn the power supply
off. When unplugging the cable, remove it while holding the connector without pulling the
cable itself. Pulling the cable itself or bending it may expose or disconnect the cable core,
resulting in a fault.
Re-transporting the product may damage it to cause a fault. Keep the packaging materials
used for shipment of the product and use them when re-transporting it.
ii