Comparison Table - Fujitsu MB91460 Series Application Note

7 Comparison Table

This chapter gives a rough overview about needed internal or peripheral resources for
debugging and debugging functionality of the different possibilities.
Resource/
Functionality
Target Chip MB91461RA
Evaluation Chip MB91V460
Adapter Board MB2198-300
Header Board MB2198-301
Starterkit SK91461 (or own target)
External Flash connected to CS0 on
target board
External RAM connected to CS1 on
target board
UART 0 for communication to debugger
Code Breakpoints
Data Breakpoints
Data Match Breakpoint
Monitoring (memory/watch variables)
Trace
Time measurement
*1) At least one type (Flash or SRAM) is needed.
*2) Not supported with Accemic MDE version used for this application note, but feature under development.
MCU-AN-300029-E-V1
MB91461 Emulation
Chapter 7 Comparison Table
Debug Type
- X
X -
X -
X -
with
X
socket
1
- (X)*
1
- (X)*
- -
X X
Use event Use event
breakpoint breakpoint
Use event Use event
breakpoint breakpoint
X X
X X
X X
- 22 - © Fujitsu Microelectronics Europe GmbH
X X -
- - -
- - -
- - -
X X -
X X -
X - -
X X -
X X X
2)
- * X
2)
- * -
- - X
1000
- -
instructions
Number of
- -
cycles