Byte; Main Controller - Xantrex XMP 2600 Programming Manual

Self Test Results

BYTE 1

ANLG
MUX
INT_RAM....... Processor Memory.
PROG_MEM .. Program Memory.
NOVRAM_A.. Non-Volatile Memory A.
NOVRAM_B .. Non-Volatile Memory B.
PWR_SUPPL.. Control circuits power supplies
ANLG_REF .... Analog section reference voltage.
DAC ................ Digital to Analog Converter.
ANLG_MUX .. Analog signal paths.
BYTE 2
VOUT ............. VOUT measurement confidence test.
VLOAD .......... VLOAD measurement confidence test.
IOUT............... IOUT measurement confidence test.
VSET .............. VSET controlling signal confidence test.
Main
The Main Controller Confidence Test result is a single byte.
Controller
The results of the test can be remotely read using the CONF? query.
The result byte has the following format:
INT_RAM.............Processor Memory.
TABLE_AREA.....Main Memory - internal tables.
SAVE_AREA .......Main Memory - settings storage areas.
BUFF_AREA........Main Memory - communications buffers.
76
DAC ANLG PWR
REF SUPPL
Light shaded bits are of tests performed during Power-On only.
Dark shaded bits are of tests performed during both Power-On and Power
Module Test.
A set bit indicates a fault.
XMP 2600 Programming Manual
NOVR NOVR PROG
AM_B AM_A MEM
VSET IOUT VLOAD VOUT
BUFF SAVE TABLE
AREA AREA AREA
rev. 1.1
Status reporting
INT
RAM
INT
RAM