Self Test Results; Power Modules - Xantrex XMP 2600 Programming Manual

Status reporting
The following illustrates the System Status Structure:
SRQ
GEN

Self Test Results

The XMP 2600 enables its user to conduct two types of self-tests: Power Module self-test
and main controller's self-test.
Power
The Power Module Test or Confidence Test result is made out of two bytes. The first byte
is the result of the latest performed test, and the second byte is the result of an on-going
Modules
confidence test of the analog section of the controlling circuits.
The results of the tests can be remotely read using the CONF? <ch> query.
OR
STATUS
OR
ENABLE
The CONF? <ch> query will return the results of the latest test performed
and initiates a run of the Confidence Test.
XMP 2600 Programming Manual
EVENT
&
ENABLE
OUTPUT
QUEUE
OR
channels
&
rev. 1.1
Self Test Results
PRIMARY
SET
EVENT
&
ENABLE
&
OR
ENABLE
IST
75