Xantrex XMP 2600 Programming Manual page 79

Alphabetical reference
VLIM?
VLOAD?
VLOW
VLOW?
VMAX?
VOUT?
66
return the current value of the upper limit on VSET programming. The
response is a <value>.
Syntax
Parameters
Category
return load voltage measurement of the Power Module. The response
is a <value>. If auto-polarity is enabled, negative output values will be
preceded with a minus sigh.
Syntax
Parameters
Category
program the lower window warning level for the load voltage of the
Power Module.
Syntax
Parameters
Category
return the current settings for the lower window warning level of the
load voltage of the Power Module. The response is a <value>.
Syntax
Parameters
Category
return the value of the Power Module's output voltage rating.
Syntax
Parameters
Category
return output voltage measurement of the Power Module. The
response is a <value>. If auto-polarity is enabled, negative output
values will be preceded with a minus sigh.
Syntax
Parameters
Category
XMP 2600 Programming Manual
Commands and Queries Reference
VLIM? <ch>
the number of the channel to be queried.
Settings
VLOAD? <ch>
the number of the channel to be queried.
Read-back
VLOW <ch>,<value>
the number of the Power Module to be programmed.
the value to be set as the lower window warning
level for the load voltage. The upper limit of the
programmed value is VSET.
Warnings
VLOW? <ch>
the number of the channel to be queried.
warnings
VMAX? <ch>
the number of the channel to be queried.
Settings
VOUT? <ch>
the number of the channel to be queried.
Read-back
rev. 1.1
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential