Power Supply - Xantrex XMP 2600 Programming Manual

Power Supply

Safety
Regulatory Approvals and Safety Agency
Compliance
Regulatory
Approvals
Safety
Agency
Compliance
Do not operate the unit with a missing module. Modules must be arranged
consecutively from left to right. Unused module locations must be closed with
ventilation obstructions. Operating the unit with missing modules or missing
internal ventilation obstructions may cause overheating and fire hazard.
WARNING — High Energy and High Voltage
Exercise caution when using and calibrating a power supply. High energy levels can
be stored at the output voltage terminals on a power supply in normal operation. In
addition, potentially lethal voltages exist in the power circuit and on the output and
sense connectors of a power supply with a rated output greater than 40 V. Filter
capacitors store potentially dangerous energy for some time after power is removed.
Operate the power supply in an environment free of flammable gases or fumes. To
ensure that the power supply's safety features are not compromised, use the power
supply as specified in this manual and do not substitute parts or make any
unauthorized modifications. Contact the service technician for service and repair
help. Repairs must be made by experienced service technicians only
European Standards:
Electromagnetic Emissions:
Electromagnetic Immunity:
European Standards:
Safety
American Standards:
Electromagnetic Emissions
Safety
XMP 2600 Programming Manual
WARNING
CAUTION
Electromagnetic Emissions and Immunity -meets Council
Directive 89/336/EEC
EN61326:1997 +A1:1998
EN61000-3-2:2000
EN61000-3-3:1995
EC61326:1997 +A1:1998
Meets EN61010 –1
Meets FCC Class A
Meets UL61010-1
rev. 1.1
g