Table of Contents
Advertisement
Commands and Queries Reference
OVSET?
PEE
PEE?
PER?
POL
POL?
return the current programmed value of the Power Module's OVP
threshold. The result is a <value>.
Syntax:
Parameters
Category
assign new value to the Primary Event Status Enable Register. Re-
calculates <rqs> and <ist>.
Syntax
Parameters
Category
return the value of the Primary Event Status Enable Register. The
value returned is a decimal number in the range 0 to 255 representing
the bits of the Register.
Syntax
Parameters
Category
return the value of the Primary Event Status Register. The value
returned is a decimal number in the range 0 to 255 representing the
bits of the Register. The register is cleared.
Syntax
Parameters
Category
change the Power Module's output polarity. This command requires
the presence of the Polarity Reversal Relay Option.
Syntax
Parameters
Category
return the current output polarity of the Power Module.
Syntax
Parameters
Category
XMP 2600 Programming Manual
OVSET? <ch>
the number of the channel to be queried.
Protection
PEE <int>
the value to be assigned to the Register - a decimal
number in the range 0 to 255 representing bits in the
Register.
Status
PEE?
none
Status
PER?
none
Status
POL <ch>,<int>
the number of the Power Module to be operated
upon.
the desired state of the Power Module's output
polarity: a value of "0" means positive and a value
of "1" means negative output polarity.
Output
POL? <ch>
the number of the channel to be queried.
Output
rev. 1.1
Alphabetical reference
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
Type: Overlapped
Type: Sequential
55
Advertisement
Table of Contents
