Xantrex XMP 2600 Programming Manual page 60

Xantrex multiple output power system
Table of Contents

Advertisement

Commands and Queries Reference
CSTS?
DISC
DISC?
DLY
DLY?
return the Power Module Status Structure data. The response is six
decimal numbers representing the bits of the status registers. The
registers are presented in the following order: Channel Event Status
Register, Channel Warning Status Register, Channel Output Status
Register, Channel Fault Status Register, Channel Status Register,
Channel Error Code. The Channel Event Status Register is cleared and
<rqs> and <ist> are re-calculated.
Syntax
Parameters
Category
program the Power Module to connect or disconnect its output relay.
Syntax
Parameters
Category
return the state of the output relay. A value of "0" is returned for a
close relay and a value of "1" is returned for an open relay.
Syntax
Parameters
Category
program the Power Module's re-programming delay period.
Following a change in the output settings of a Power Module there
will be a period of time in which the Power Module will ignore
abnormal working conditions. In addition, during this re-programming
delay period, the Over Voltage Protection settings will, temporarily,
be set to maximum.
Syntax
Parameters
Category
return the current re-programming delay period of the Power Module.
The returned value is a decimal number in the range 0 to 25.5.
Syntax
Parameters
Category
XMP 2600 Programming Manual
CSTS? <ch>
the number of the channel to be queried.
Status
DISC <ch>,<int>
the number of the Power Module to be programmed.
the desired state of the output relay: a value of "0"
will cause the relay to close and a value of "1" will
cause the relay to open.
Output
DISC? <ch>
the number of the channels to be queried.
Output
DLY <ch>,<int>
the number of the Power Module to be programmed.
the amount of delay expressed in seconds. The
allowed range is 0 to 25.5. The resolution used by
the Power Module is 0.1 of a second.
Settings
DLY? <ch>
the number of the channel to be queried.
Settings
rev. 1.1
Alphabetical reference
Type: Sequential
Type: Overlapped
Type: Sequential
Type: Sequential
Type: Sequential
47

Advertisement

Table of Contents
loading

Table of Contents