Xantrex XMP 2600 Programming Manual page 57

Alphabetical reference
*TST?
*WAI
ARM
ARM?
BUFCLR
CALDT?
44
initiates a self-test of the XMP 2600 main control circuits. The tested
areas are: Controller Internal RAM, Tables Storage RAM, Settings
Storage Areas and Buffers RAM. The result of the self-test is reported
as a decimal number in the range 0 to 16 representing the bits of the
result register.
Syntax
Parameters
Category
prevent the XMP 2600 from parsing any further commands or queries
until all pending operations have finished.
Syntax
Parameters
Category
program a Power Module to the Armed state in which further SET,
PROT and POL programming will be stored with no immediate effect
of the output of the Power Module.
Syntax
Parameters
Category
return the state of the Power Module. The value returned is "0" if the
module is not armed and "1" if it is.
Syntax
Parameters
Category
empty the Output Queue.
Syntax
Parameters
Category
return the Calibration Date of a Power Module. The response is an
unquoted string with the following format: dd/mm/yy where: dd is the
day of the month, mm is the month and yy is the last two digits of the
year.
Syntax
Parameters
Category
XMP 2600 Programming Manual
Commands and Queries Reference
*TST?
none
System
*WAI
none
Synchronization
ARM <ch>
the number of the channel to be armed.
Trigger and Sync
ARM? <ch>
the number of the channel to be queried.
Trigger and Sync
BUFCLR
none
System
CALDT? <ch>
the number of the Channel to be queried.
Status
rev. 1.1
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential