Xantrex XMP 2600 Programming Manual page 59

Alphabetical reference
CMASK
CMASK?
CONF?
CONF?
46
program the positive and negative edge masks of the Events Filter
Mechanism.
Syntax
Parameters
Category
queries the value of the positive and negative edge masks of the
Events Filter Mechanism. The query return two numbers: positive
mask and negative mask.
Syntax
Parameters
Category
initiates a self-test of the XMP 2600 main control circuits. The tested
areas are: Controller Internal RAM, Tables Storage RAM, Settings
Storage Areas and Buffers RAM. The result of the self-test is reported
as a decimal number in the range 0 to 16 representing the bits of the
result register.
Syntax
Parameters
Category
initiates a self-test of a Power Module. The tested areas are: Controller
Internal RAM, control circuit XMP 2600, analog section reference
voltage, D/A circuit and analog MUX. The result of the self-test is
reported as two decimal numbers in the range 0 to 255 representing
the bits of the result registers.
Syntax
Parameters
Category
The self-test is a lengthy operation that is carried out in the background.
The CONF? Query initiates a self-test and returns the result of the
previously executed self-test.
XMP 2600 Programming Manual
Commands and Queries Reference
CMASK <ch>,<int>,<int>
The number of the Channel to which the masks are
being programmed.
The two integers are (respectively) the value of the
positive and negative masks. A bit value of "1"
enables the transition to generate an event while a bit
value of "0" disables it.
Status
CMASK? <ch>
the number of the Channel to be queried.
Status
CONF?
none
System
CONF? <ch>
the number of the Power Module to be tested.
Status
rev. 1.1
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential