Xantrex XMP 2600 Programming Manual page 64

Commands and Queries Reference
ILIM
ILIM?
ILOAD?
ILOW
ILOW?
IMAX?
program an upper limit on subsequent programming of current
settings for the Power Module.
Syntax
Parameters
Category
return the current value of the upper limit on ISET programming. The
response is a <value>.
Syntax
Parameters
Category
return output current measurement of the Power Module. The
response is a <value> (same as the IOUT? query).
Syntax
Parameters
Category
program the lower window warning level for the output current of the
Power Module.
Syntax
Parameters
Category
return the current settings for the lower window warning level of the
output current of the Power Module. The response is a <value>.
Syntax
Parameters
Category
return the value of the Power Module's output current rating.
Syntax
Parameters
Category
XMP 2600 Programming Manual
ILIM <ch>,<value>
the number of the Power Module to be programmed.
the value to become the new upper limit for ISET
programming. The upper value of the programmed
value is IMAX.
Settings
ILIM? <ch>
the number of the channel to be queried.
Settings
ILOAD? <ch>
the number of the channel to be queried.
Read-back
ILOW <ch>,<value>
the number of the Power Module to be programmed.
the value to be set as the lower window warning
level for the output current. The upper limit of the
programmed value is ISET.
Warnings
ILOW? <ch>
the number of the channel to be queried.
warnings
IMAX? <ch>
the number of the channel to be queried.
Settings
rev. 1.1
Alphabetical reference
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
51