Xantrex XMP 2600 Programming Manual page 63

Alphabetical reference
GRP?
IALL?
ID?
IHIGH
IHIGH?
50
return the current definition of the group of Power Modules. The
response is made up of two decimal numbers (each in the range 0 to
255) being the high (sent first) and low parts of a 16-bit word. Each
bit in the response represents one Power Module (see GRP command
for details on bit values).
Syntax
Parameters
Category
return output current measurements of all installed Power Modules.
The response is a series of values - one for each installed Power
Module, separated with ",", starting with the lower numbered module.
Syntax
Parameters
Category
return the identification string: 'XANTREX XMP 2600'.
Syntax
Parameters
Category
program the upper window warning level for the output current of the
Power Module.
Syntax
Parameters
Category
return the current settings for the upper window warning level of the
output current of the Power Module. The response is a <value>.
Syntax
Parameters
Category
XMP 2600 Programming Manual
Commands and Queries Reference
GRP?
none
System
IALL?
none
Read-back
ID?
none
System
IHIGH <ch>,<value>
the number of the Power Module to be programmed.
the value to be set as the upper window warning
level for the output current. The upper limit of the
programmed value is IMAX. The lower limit of the
programmed value is ISET.
Warnings
IHIGH? <ch>
the number of the channel to be queried.
warnings
rev. 1.1
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential
Type: Sequential