Tables 68, 69 (Current Controller, Valve 1, Valve 2); Tables 72, 73 (Process Variables, Valve 1, Valve 2); Table 96: Parameters, Table 68 (Current Controller, Valve 1); Table 97: Parameters, Table 72 (Process Variables, Valve 1) - WAGO 750-632 Manual

130 Appendix
11.4.2.9

Tables 68, 69 (Current Controller, Valve 1, Valve 2)

Tables 68 and 69 are identically structured. As an example, Table 68 will be
explained for Valve 1 here.

Table 96: Parameters, Table 68 (Current Controller, Valve 1)

Register
0
1 ... 2
3
4
5
6
7 ... 9
10
11

11.4.2.10 Tables 72, 73 (Process Variables, Valve 1, Valve 2)

Tables 72 and 73 are identically structured. As an example, Table 72 will be
explained for Valve 1 here.

Table 97: Parameters, Table 72 (Process Variables, Valve 1)

Register
0 ... 17
18
19
20
21
Pos : 120 /Serie 750 (WAGO-I/O-SYST EM)/Anhang/Zahl endarstell ung 750- 0632 @ 16\mod_1379936209100_21.doc x @ 132490 @ 233 @ 1
Name, Bits
Type Explanation
CC_PID_ 0
ENABLE,
UINT16
CC_KP, 0 ... 15
UINT16
CC_KI, 0 ... 15
UINT16
Name, Bits
Type Explanation
PV_018,
INT16
PV_019,
INT16
PV_020,
INT16
PV_021,
INT16
WAGO-I/O-SYSTEM 750
750-632 Proportional Valve Module
Value/Range
(Default)
0 = OFF Activation of the PID
1 = ON controller
(Default: 1)
(Default: 0) (reserved)
(Default: PID Controller (P
3000) proportion)
(Default: Control PID (I proportion)
1000)
(Default: (reserved)
1000)
(Default: 2) (reserved)
(Default: 0) (reserved)
(Default: 1) (reserved)
(Default: 1) (reserved)
Value/Range
(Default)
(variable) (reserved)
Signal ADC value
1 LSB = 0.1 mA.
The measured value filter
is active.
Signal PLC actual value in
0.01% of the nominal
value
The measured value filter
is active.
Signal ADC value
1 LSB = 0.1 mA.
The measured value filter
is not active.
Signal PLC actual value in
0.01% of the nominal
value
The measured value filter
is not active.
Version 1.3.0, valid from FW/HW-Version 01/01
Description
Description
Manual