Table 31: Approach End Stop Value - WAGO 750-632 Manual

WAGO-I/O-SYSTEM 750
750-632 Proportional Valve Module

Table 31: Approach End Stop Value

No. Event
1 Set SPL_EN to "0"
2 Set JOG_POS to "1"
Set JOG_POS to "0"
3 Set JOG_POS to "1"
Set DI to "1".
4
5 Set DI to "0".
6 Set JOG_POS to "0"
7 Set JOG_NEG to "1"
Set JOG_NEG to "0"
8 Set JOG_POS to "1"
9 Set DI to "1".
Set JOG_POS to "0"
10
11 Set JOG_POS to "1"
Set JOG_POS to "0"
Set DI to "0".
12
Manual
Version 1.3.0, valid from FW/HW-Version 01/01
Description/Behavior
"JOG mode" is activated.
Present current level is maintained.
Present current level is increased.
Present current level is maintained.
Present current level is increased.
Rising ramp stops. Actual value drops until the
end stop value is reached. The actual value is
then frozen.
Present current level is maintained.
Present current level is maintained.
Present current level is reduced
Present current level is maintained.
Present current level is increased.
Rising ramp stops. Actual value drops until the
end stop value is reached. The actual value is
then frozen.
Present current level is maintained.
Present current level is increased
(even if the DI is still active).
Present current level is maintained.
Present current level is maintained.
Function Description 47