Control Ports; Power Requirements; Lamp; Type - Christie E Series Service Manual

Section 7: Specifications

7.2.5 Control Ports

• RS232 x 1, 9-pin RS232 male (d-sub)
• Wired Remote Connector x1, 3.5mm stereo female. 5V/300mA max.
• RJ45x1, Ethernet interface for command, control and content

7.2.6 Power Requirements

• Mains voltage range: 90VAC-264VAC (Projector functions normally and without damage at 264VAC Max.)
• Mains frequency range: 50Hz/60Hz
• 330W Dual lamp Mode maximum current rating: 9.2A@100VAC, 330W dual lamp mode
• 350W Dual lamp Mode maximum current rating: 9.6A@100VAC, 350W dual lamp mode
• Inrush Current: 65A maximum
• Maximum Power Consumption:
DHD675-E/DWU675-E:
• 330W (Max. Brightness Mode) 885W +/- 10% (dual lamp) / 455W +/- 10% (single lamp)
• 280W (ECO Mode) 735W +/- 10% (dual lamp) / 395W +/- 10% (single lamp)
DHD775-E/DWU775-E:
• 350W (Max. Brightness Mode) 920W +/- 10% (dual lamp) / 500W +/- 10% (single lamp)
• 280W (ECO Mode) 755W +/- 10% (dual lamp) / 415W +/- 10% (single lamp)
7.3

Lamp

7.3.1 Type

• DHD675-E/DWU675-E: OSRAM P-VIP 330W/1.0 E20.9n x2
• DHD775-E/DWU775-E: OSRAM P-VIP 350W/1.0 E20.9n x2

7.3.2 Operating Position

• ±20 degree max tilt of lamp axis from horizontal
7.4

Physical Specifications

7.4.1 Dimensions

• Product: (L x W x H) 532 x 456 x 215 (mm) (excluding feet & with lens removed)
• Shipping: (L x W x H) 591 x 965 x 0.390 (mm)

7.4.2 Weight

• Product: < 19.5kg (with lens removed)
• Shipping: <26.3kg (includes packaging)
7-4 E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)