Procedure - Christie E Series Service Manual

5.2.18Connector-A Board
Replacement Time: 20 minutes

Procedure:

1. Remove Top Cover. See
2. Remove Top Shield. See
3. Disconnect all harnesses from Connector-A Board. NOTE: Do not rock main board harness when
removing.
4. Remove screws (4). See Figure 5-30.
5. Replace Connector-A Board.
6. Install screws (4).
7. Connect all harnesses to Connector-A Board.
E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)
5.2.5 Top Cover.
5.2.7 Top Shield.
F 5-30 C
IGURE ONNECTOR
Section 5: Parts and Module Replacement
-A B
OARD
5-17