Light Engine; Procedure; Main Board Fan; Lens Motor - Christie E Series Service Manual

11. Remove Cooling Fan - Lamp 2 Bracket (3 screws). See Figure 5-53.
12. Remove screws (4).
13. Disconnect all harnesses connected to Light Engine.

5.2.34Main Board Fan

Replacement Time: 65 minutes

Procedure:

1. Remove Light Engine. See
2. Disconnect harness (Fan 2) from Connector-A Board.
3. Remove screws (2). See Figure 5-54.
4. Replace Main Board Fan.

5.2.35Lens Motor

Replacement Time: 80 minutes
Procedure:
1. Remove Light Engine. See
2. Remove horizontal or vertical Lens Motor (2 screws). See Figure 5-55.
3. Replace Lens Motor.
E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)
F 5-53 R C
IGURE EMOVE OOLING
5.2.33 Light Engine.
5.2.33 Light Engine.
F 5-55 R
IGURE
Section 5: Parts and Module Replacement
F - L 2 B
AN AMP RACKET
F
IGURE
L M
EMOVE ENS OTORS
5-54 R M B
EMOVE AIN OARD
F
AN
5-31