Rear Exhaust Fans; Procedure - Christie E Series Service Manual

3. Disconnect harness (Fan 11) from Connector-B Board.
4. Remove Color Wheel fan shield (2 screws). See Figure 5-15.
5. Remove harness cable from retaining clips.
6. Remove screws (2). See Figure
7. Remove Color Wheel Fan.
8. Install new fan.
9. Connect harness (Fan 11 to Connector-B Board), and secure cable bundle with retaining clips.

5.2.14Rear Exhaust Fans

Replacement Time: 30 minutes

Procedure:

1. Remove Top Cover. See
2. Remove Top Shield. See
3. Disconnect harnesses (Fan 4 from Connector-B Board and Fan 10 from Connector-A Board).
4. Remove screws (2) securing frame to base plate. See Figure
5. Move top of frame towards center of projector to release it from the chassis and pull frame out.
E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)
F 5-15 R C
IGURE EMOVE OLOR
5-15.
5.2.5 Top Cover.
5.2.7 Top Shield.
F 5-16 R
IGURE EMOVE
Section 5: Parts and Module Replacement
W F
HEEL AN
5-16.
R E F
EAR XHAUST ANS
5-11