Procedure; Lamp Housing - Christie E Series Service Manual

Section 5: Parts and Module Replacement
14. Remove screws (6) securing Lamp Housing. See Figure 5-38.
15. Lift out Lamp Housing and turn over to remove attached components. See Figure 5-39.
• Remove Lamp 1 and Lamp 2 Thermal Switch - Screw (1) for each sensor.
• Remove Lamp 1 and Lamp 2 Prism Sensors - Screw (1) for each.
• Remove Prism Motor bracket - Screws (2).
16. Replace Lamp Housing
5.2.24Back Panel
Replacement Time: 20 minutes

Procedure:

1. Remove Top Cover. See
2. Remove Top Shield. See
5-24
F 5-38 L
IGURE AMP
F 5-39 L H
IGURE AMP OUSING
5.2.5 Top Cover.
5.2.7 Top Shield.
H S
OUSING CREWS
C
OMPONENTS
E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)