Procedure; Keypad - Christie E Series Service Manual

Section 5: Parts and Module Replacement
4. Disconnect harnesses (2) from Keypad board. See Figure 5-42.
5. Remove screws (6). See Figure 5-43.
6. Remove EMI Foam Blocks (2).
7. Replace Keypad Board.
5.2.26Power Inlet
Replacement Time: 45 minutes

Procedure:

1. Remove Top Cover. See
2. Remove Top Shield. See
3. Remove Back Panel. See
4. Remove Power Supply. See
5. Disconnect from Power Supply.
5-26
F 5-42 K
IGURE EYPAD
F 5-43 R
IGURE EMOVE
5.2.5 Top Cover.
5.2.7 Top Shield.
5.2.24 Back Panel.
5.2.22 Power Supply.
H
ARNESSES
K
EYPAD
E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)