Procedure - Christie E Series Service Manual

Section 5: Parts and Module Replacement
19. Install metal cover and secure with screws (4).
20. Connect harnesses.
5.2.16Power Module Fan
Replacement Time: 25 minutes

Procedure:

1. Remove Top Cover. See
2. Remove Top Shield. See
3. Disconnect harness (Fan 1) from Connector-A Board. See Figure 5-22.
4. Remove harnesses from cable clip.
5. Remove screws (2) securing fan frame to chassis base. See Figure 5-23.
6. Remove fan assembly.
5-14
5.2.5 Top Cover.
5.2.7 Top Shield.
F 5-22 P M
IGURE OWER ODULE
F 5-23 P M
IGURE OWER ODULE
F H
AN ARNESS
F S
AN CREWS
E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)