Optical Fan - Christie E Series Service Manual

Section 5: Parts and Module Replacement
5. Remove Color Wheel Fan Top Shield (2 screws). See Figure 5-27.
6. Remove Color Wheel Fan Base Plate with fan attached (1 screw) and flip the assembly to the side. See
Figure 5-28.
7. Remove Optical Fan Assembly harness from the retaining clip.
8. Remove the screws (4) securing the Optical Fan using the 90° angle screwdriver.
9. Remove the Fan from the plastic frame. Note fan orientation before removing. See Figure 5-29.
10. Install the new Fan. Make sure the fan is installed in the proper orientation.
5-16
F 5-27 C W
IGURE OLOR HEEL
F 5-28 C W
IGURE OLOR HEEL
F 5-29 R
IGURE EMOVE
F T S
AN OP HIELD
F B P
AN ASE LATE
O F
PTICAL AN
E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)