Osd-On Screen Display; Otr-Output Resolution - Christie Mirage SST Technical Reference

Examples
Set the static IP address to 192.168.1.100, with a netmask of 255.255.255.0, and no gateway:
(NET "192.168.1.100" "255.255.255.0")
Turn on DHCP support:
(NET+DHCP 1)
OSD–On Screen Display
Displays or hides the on-screen display.
Commands
Command Description
OSD? Returns the status of the on-screen display.
(Read-only)
OSD <0 | 1> Enables or disables the on-screen display.
Examples
Get the current state of the on-screen display:
(OSD?)
Hide the on-screen display:
(OSD 0)
OTR–Output Resolution
Returns the maximum number of columns and rows for the display.
Commands
Command Description
OTR? Returns the output resolution. (Read-only)
OTR <0 | 1> Changes the output resolution on 4K projector if the
Mirage license installed. Once set, restart the projector
after running this command.
OTR+HRES? Returns the maximum number of columns for the
display. (Read-only)
OTR+VRES? Returns the maximum number of rows for the display.
(Read-only)
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
0 = Hides the on-screen display
1 = Displays the on-screen display
(Default)
Values
—
0 = 4096x2160—4K (Default)
1 = 2048x1080—2K
—
—
48