Send Parametrizing Data - Festo CP-FB13-E Programming And Diagnostics Manual

2. Commissioning

2.3.2 Send parametrizing data

Octet 1: Station status
Bit Meaning Explanation
0 — Reserved
1 —
2 —
3 WD_On Response monitoring of the CP system on/off:
logical "0":
logical "1":
4 Freeze_Req logical "0":
logical "1":
5 Sync_Req logical "0":
logical "1":
6 Unlock_Req Bit 7
7 Lock_Req
Festo P.BE-CP-FB13-E-EN en 0112e
The parametrizing data are transmitted from the DP master to
the CP system with the function Set_Prm.
off
On
Freeze mode not requested by master
Freeze mode set by master
Sync mode not requested by master
Sync mode set by master
Bit 6 Explanation
0 0 min T + slave parameters may be overwritten
SDR
0 1 Release CP system for other masters
1 0 CP system blocked for other masters
1 1 Release CP system for other masters
2-37