General Instructions; Installation - Festo CP-FB13-E Programming And Diagnostics Manual

1. Installation

1.1

General instructions

Festo P.BE-CP-FB13-E-EN en 0112e
Warning
Switch off the following before undertaking installation
and/or maintenance work:
– the compressed air supply
– the power supply to the field bus node (pins 1 and 2).
– the load voltage supply to the valves.
You can thereby avoid:
– sudden uncontrolled movements of loose tubing
– unexpected movements of the connected actuators
– non-defined switching states of the electronic compo-
nents.
Caution
The node of the CP system contains electrostatically sensi-
tive components.
S Do not therefore touch any contacts.
S Please observe the regulations for handling electrostati-
cally sensitive components.
You can thereby prevent the electronics of the node from
being damaged.
General information on installing the CP modules can be
found in the manual "CP system".
1-3