2. Commissioning
2.1.4 General information
Festo P.BE-CP-FB13-E-EN en 0112e
FREEZE and SYNC
The operating modes FREEZE and SYNC are supported by the
CP system in accordance with EN 50170 (DIN 19245).
The access method for the FREEZE or SYNC command de-
pends on your controller. Please refer to the documentation
for your field bus module for further information.
Caution
In the following cases, the FREEZE or SYNC mode will be
automatically reset:
– when the CP system is switched on/off
– when the field bus module has stopped.
The FREEZE mode will also be automatically reset in the
following case:
– when the bus connection to the CP system is interrupted
(response monitoring active).
2-5