Festo CP-FB13-E Programming And Diagnostics Manual page 18

1. Installation
DIL switches
(factory setting)
1-6
DIL switches
Set the following functions on the DIL switch:
– the hundreds figure of the field bus address
– Field bus protocol PROFIBUS-DP:
Switch elements 3...6 must be in the positions specified
below, in order that the field bus protocol of the PROFI-
BUS-DP can be set.
Switch element Description of function
1 Field bus address
ON:
OFF: Field bus address
2 Diagnostic message V
ON:
OFF: inactive
3 Field bus protocol PROFIBUS-DP:
ON:
OFF: reserved
4 Field bus protocol
ON:
OFF: reserved
5 Field bus protocol
ON:
OFF: reserved
6 Field bus protocol
ON:
OFF: must be set to OFF
> 100
Field bus address
< 100
/V
VAL OFF
active
must be set to ON
must be set to ON
must be set to ON
reserved
Festo P.BE-CP-FB13-E-EN en 0112e