Festo CP-FB13-E Programming And Diagnostics Manual page 95

3. Diagnosis
Control system Module
SIMATIC S5 with OB23
IM 308C
OB24
OB35
SIMATIC S7/M7 OB82
OB86
Festo P.BE-CP-FB13-E-EN en 0112e
You can set two types of error reactions of the control system.
– When a fault occurs the controller switches to the operat-
ing mode "STOP" (hard error reaction) or
– when a fault occurs the controller remains in the operat-
ing mode "RUN" (soft error reaction).
Meaning
Reaction to QVZ with direct
periphery access
Reaction to QVZ with periphery
access via process image
Reaction to PEU (periphery not
clear)
Reaction to a device-related
diagnosis
Reaction to failure of a DP slave
Further details can be found in the appropriate manuals for
the control systems.
STOP RUN
Default OB is programmed
Default OB is programmed
Default OB is programmed
Default OB is programmed
Default OB is programmed
3-19