2. Commissioning
2.2.3 COM PROFIBUS 5.0
2
1
Fig. 2/9: Configuration with COM PROFIBUS 5.0
Festo P.BE-CP-FB13-E-EN en 0112e
Selecting the station
3
5
1. Open the directory \DP-Slave\Valves\... in the hardware
catalogue. 1.
The Festo valve terminals will be listed. (Prerequirements:
You have copied the device data base files as described in
step 1 of the preparations).
2. Click with the left-hand mouse key on the icon of the valve
terminal 2. With the mouse key pressed down pull the
icon onto the PROFIBUS line on the DP master 3.
The icon of the valve terminal will appear. 4.
4
2-19