Festo CP-FB13-E Programming And Diagnostics Manual page 57

2. Commissioning
Icons
Festo P.BE-CP-FB13-E-EN en 0112e
2. There are Bitmap files with icons on the CD ROM to facili-
tate configuration. Copy the Bitmap into directory
\STEP7\S7DATA\NSBMP on your PC/programmer.
file: PBFB13CN.DIB
3. The Bitmaps can either:
S be copied manually into the above mentioned directory
(e.g. with Windows Explorer) or
S loaded via menu item "Extras" "Install new GSD"
file type "Bitmap" in HW Config.
4. Edit the mask "Properties of the DP master"
– bus profile
– baud rate
5. Activate the DP master in the rack.
Further information (directories, etc.) can be found in the file
"Readme" in the main directory of the CD ROM.
2-25