2. Commissioning
Configuring
2-20
(Prerequirements: You have copied the icon file as de-
scribed in step 2 of the preparations).
3. Double-click on the icon of the valve terminal 4.
The mask "Slave properties" will appear 5.
4. Select the slave address identical to the selected setting
on the rotary switch/DIL switch (see chapter 1.2.1) in the
slave and confirm.
Station selection is then completed.
Configuration with COM PROFIBUS 5.0
Prerequirements:
–
The device data base files must be in the directory of your
PC/programmer.
–
The mask "Bus parameter" must be edited (bus profile,
baud rate).
–
The PROFIBUS address must be assigned (see above).
–
The station type "FESTO CP FB13" must be selected
(see above).
Access the mask "Configure"
1. Click with the right-hand mouse key on the icon of the
valve terminal.
2. Now click "Configure" in the menu which appears.
The mask "Configure" will appear (Fig. 2/10).
Festo P.BE-CP-FB13-E-EN en 0112e