2. Commissioning
Icons
2-14
2. There are icon files for Festo valve terminals on the CD
ROM to facilitate configuration. Copy the relevant files
into the following directory on your PC or programmer:
–
COM PROFIBUS 3.x: ...\COMPB3x\BITMAPS
file: PBFB13CN.BMP
–
COM PROFIBUS 5.0: ...\SIEMENS\CPBV50\BITMAPS
file: PBFB13CN.DIB
3. Edit the following fields in the mask "Bus parameter" in
the menu "Configure":
–
Bus profile
–
Baud rate
Further information (directories, etc.) can be found in the file
"Readme" in the main directory of the CD ROM.
Festo P.BE-CP-FB13-E-EN en 0112e