Spline Interpolation G06 - Siemens SINUMERIK 880 Programming Manual

4 Programming of Motion Blocks 05.91

4.2.12 SPLINE interpolation G06

4.2.12 SPLINE interpolation G06
The "SPLINE interpolation" function
is an Option
The order code is: B 60
A spline is a linking of curves which have the same function values, identical slope and
identical curvature at their connecting points.
SPLINE interpolation G06
SPLINE interpolation reduces the amount of programming required for machining complex
contours and permits shapes to be machined which cannot be described with standard
geometries.
For programming of SPLINE interpolation, please refer to the
"SPLINE Interpolation" Programming Guide.
Action of G06 is modal. G06 is deselected by another preparatory function of the 1st G group.
-3
SPLINE programs are only executed with input resolution 10 mm.
4–42
© Siemens AG 1991 All Rights Reserved 6ZB5 410-0HD02
SINUMERIK 880, (PG)