Siemens SINUMERIK 880 Programming Manual page 249

11 Programming of Cycles
11.11 Part program handling
Example: @f22 in the case of a block with "normal" comment
The block is:
a) Word five is to be read:
The word is contained in the comment. The output R parameters are as follows:
R
y
R +1 to R +5
y y
b) Word seven is to be read:
In this case, left bracket + blank, right bracket + blank and all other blanks are
considered to be word boundaries. Consequently, word seven is "Y50".
Output R parameters:
R
y
R +1
y
R +2
y
R +3
y
R +4
y
R +5
y
11–62
X100 ( DRILLING AND MILLING ) Y50
N10 G01
: 2 Word contained in the comment
: 0
: 0 No error
: 89 ("Y") Address letter
: 0 Extended address No
: 0 No extended address
: 0 Operator not available
: 50 Value
© Siemens AG 1991 All Rights Reserved
05.91
L F
6ZB5 410-0HD02
SINUMERIK 880, (PG)