Siemens SINUMERIK 880 Programming Manual page 5

Technical Comments
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or
when servicing.
For simplicity, preparatory functions have been programmed in the examples even if they are
basic settings.
The program examples have been written in ISO code.
All geometric values are metric.
This document is subject to modification as a result of technical developments.
Cycle programming and CL 800 language are
described in the following publications:
SINUMERIK System 800,
Cycles Programming Guide and
CL 800 Planning Guide.