Siemens SINUMERIK 880 Programming Manual page 240

05.91
@f03 Select program for simulation
This @ code enables a part program for special simulation "SIMUL MARKS" to be
selected from within a part program.
Syntax:
Input parameters:
CL 800 reserved word:
@f04 Disable program for execution
This @ code enables another part program specified by the program number and
program type to be disabled from within a part program.
Syntax:
Input parameters:
Output parameters:
CL 800 reserved word:
@f05 Enable program for execution
This @ code enables another part program specified by the program number and
program type to be enabled for execution from within a part program.
Syntax:
Input parameters:
Output parameters:
CL 800 reserved word:
© Siemens AG 1991 All Rights Reserved
SINUMERIK 880, (PG)
@f03 <R >
x
R : Program type (%=1, L=2)
x
R +1: Program number
x
PP SELECT SIM
@f04 <R > <R >
x y
R : Program type (%=1, L=2)
x
R +1: Program number
x
R : Error feedback
y
0: No errors
1: No program
5: Input error
Not yet defined.
@f05 <R > <R >
x y
R : Program type (%=1, L=2)
x
R +1: Program number
x
R : Error feedback
y
0: No error
1: No program
5: Input error
Not yet defined.
6ZB5 410-0HD02
11 Programming of Cycles
11.11 Part program handling
11–53