Siemens SINUMERIK 880 Programming Manual page 246

05.91
@f21 Insert word in block
@f21 inserts a word at a defined place in the block. The block must have previously
been read with @f10 or @f11. As a further precondition, the part program containing
the block must have been selected (@f01). After the block has been inserted, it is
automatically written back into the part program memory.
Syntax and R parameter assignment are analogous to @f20.
R = OFFH
x
The absolute block address of the next unassigned memory area in the
part program is selected automatically by inserting "L
CL 800 reserved word:
Example: for @f21
The following block is incorporated in the machining buffer:
The positional data "Z80" is to be inserted before"L
must be assigned to the input R parameters:
R : 4
x
R +1: 90 ("z")
x
R +2: 0
x
R +3: 0
x
R +4: 0 ("=")
x
R +5: 80
x
© Siemens AG 1991 All Rights Reserved
SINUMERIK 880, (PG)
Automatic cursor control
The new cursor offset is generated automatically.
buffer.
INP WORD
N50
" using @f21. The following values
F
Word number in block
Address letter
Extended address No
No extended address
Operator not available
Value
6ZB5 410-0HD02
11 Programming of Cycles
11.11 Part program handling
" in the block
F
G01 X100 Y50 L F
11–59