Siemens SINUMERIK 880 Programming Manual page 106

4 Programming of Motion Blocks
4.2.15 Program coordination
• Coordination command "END" :
Programming:
When programming in the format: [. . . . . . . . . . .], the parameters can
only be deleted individually if a blank is used as separation in addition to
Example:
Channel 3
C3 S1
Channel 1: Program coordination
4–48
Indication of end of program to the channels
waiting with WAIT E. The command must be
located immediately before M30.
[END, K., K., ...]
K. : 1...16
"END" and "WAIT E" are permitted in the main program only.
the comma.
S3
X3
Z3
T3
X2
Z2
T2
Channel 2
© Siemens AG 1991 All Rights Reserved
01.93
Gantry
loader
X4
Z4
Y4
Channel 4
6ZB5 410-0HD02
SINUMERIK 880, (PG)