Siemens SINUMERIK 880 Programming Manual page 43

05.91
Action b
Block-by-block cancellation of:
• settable zero offset coarse and fine (G54 to G57)
• programmable zero offset (G58 and G59)
• external zero offset (from PLC)
• DRF offset
• PRESET offset
Coarse setting
Fine setting
1st programmable ZO (G58)
2nd programmable ZO (G59)
External ZO (from PLC)
DRF offset (with handwheel)
PRESET offset
Cancellation of zero offsets
Reference to machine zero
L F
N30 D0
L F
N35 G53 X . . . Y . . .
© Siemens AG 1991 All Rights Reserved
SINUMERIK 880, (PG)
1st 2nd
settable zero offset
G
54 G55
(Cancellation of tool offset)
(Cancellation of all zero offsets and travel to position in machine
system)
6ZB5 410-0HD02
3 Directons of Movement, Dimensioning
3.5 Zero offset G54...G59
3rd 4th
G56 G57
Suppression with
G53 (@706)
3–13