Siemens SINUMERIK 880 Programming Manual page 3

SINUMERIK documentation
®
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in "Remarks" column :
A . . . New documentation
B . . . Unrevised reprint with new Order No.
C . . . Revised edition with new status.
If factual changes have been made on the page since the last edition, this is indicated
by a new edition coding in the header on that page.
Edition
05.91
01.93
Other functions not described in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
This publication was produced on the Siemens 5800 Office
System.
Subject to change without prior notice.
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or
design, are reserved.
©
Siemens AG 1991 All Rights Reserved
Order No.
6ZB5 410-0HD02-0BA0
6ZB5 410-0HD02-0BA1
Remarks
A
C