P1 Debug Parameters; P2 Factory Parameters - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive
P0.13 User-defined Parameter 13
P0.14 User-defined Parameter 14
P0.00 ~P0.14 default value is different. When P0.00 ~P0.03 default value is special for H0.05 =
3, it is fitting for PID application.
P0.15 User-defined Parameter 15
P0.15 can not be revised.

P1 Debug Parameters

Function Name
Code
P1.00~ Debug parameter i
P1.15 (i=0,1,2,3,......,15)

P2 Factory Parameters

Function Name
Code
P2.00 Factory password
Remark：CDE360 series without AO2 output and X5 input
A0.00～P1.15 【A0.14】
A0.00～P1.15 【A0.15】
H0.05～H0.05 【H0.05】
Range Default
0~65535 0
Range
0~9999
85
- -
Chapter 5 Parameter List Table
Step Description
Reserved for factory debug, user don't
1 change them unless receive guidance
from factory engineers suggestions.
Default
0
Step Description
1