Table of Contents
Advertisement
CDE360 Vector Control AC Drive
2.1 CDE360 Technical Specifications
Item
Input voltage range
Basic
Frequency resolution
Performance
Maximum output
Carrier frequency
Overload capacity
Basic
Function
Magnetic braking
CBC current limiting
Overcurrent and
overvoltage control
Chapter 2 Product Information
Single-phase: 220V;
Rated Input
Three-phase : 220V/380V/480V;
Frequency: 50/60Hz
Voltage fluctuation: -15%～10%;
Imbalance factor: less than 3%;
Voltage frequency: 47～63Hz
Control mode
VF control; Open-loop vector control; Close-loop vector control
Digital setting: 0.01Hz;
Analog setting: 0.5% × maximum frequency
V/F control: 3500Hz; Vector control: 300Hz
Speed range
VF control: 1:60; Vector control: 1:100
0.5~16.0kHz(Model dependent). The carrier frequency can be
automatically adjusted based on features of the load.
Start torque
0.5Hz/150%*rated motor torque
G type: 150% rated current for 60s,180% rated current for 3s
L type: 120% rated current for 60s
Keypad; Control terminals (two-line, three-line); Serial
Run mode
communication (RS485).The user can perform switch-over
between these sources in various ways.
V/F curve
Straight line type; Multiple point type; N-power type
Ramp curve
Straight line or S curve; Four ramp times (range: 0.1s to 6000.0s)
Torque boost
Automatic/manual torque boost
Speed trace
All types have the function of the speed trace.
Motor braking
DC braking; Energy consumption braking; Magnetic braking
Braking frequency: 0.00Hz to Maximum frequency;
DC braking
Braking time: 0.0s to 100.0s;
Braking current: 0.0% to 100.0%*Rated motor current
For occasions which have the request of fast stop or regenerative
loads, the function of magnetic braking can be used. The function
can avoid frequent protection due to over voltage.
The function of CBC current limiting is to minimize the fault of over
current and keep the normal running of the AC drive.
The function is to restrict the current and voltage automatically
during running and avoid the frequent fault protection of over
current and over voltage.
Table 2- 1 Technical Specifications
Specifications
Chapter 2 Product Information
Advertisement
Table of Contents
