Terminals Wiring Diagram Of The Ac Drive - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive Chapter 3 Mechanical and Electrical Installation

3.2.3 Terminals Wiring Diagram of the AC drive

Figure 3- 8 The wiring diagram of CDE360 Vector Control AC drive
Remarks:
○
1) Terminal '◎ ' represents terminals of the main circuit and ' ' represents terminals of the
control loop.
2) The AC drive and the motor should be reliably connected to the ground.
3) If the motor and AC drive can not be connected to the ground. Please connect the ground
terminal of the motor to the PE terminal of the AC drive.
4) AI2 jumper is 'mA', AI1/AO1 jumper is 'V'.
485 balance resistor jumper in the off position
28
- -