Control Terminals And Wiring Description - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive
F. Earthing terminals
Connect to the ground reliably. The resistance of the earthing line should be less than 0.1Ω.
Otherwise, it may result in the malfunction of the device or even the damage to the
device.Do not connect the earthing terminal

3.2.5 Control Terminals and Wiring Description

3.2.5.1 Terminal Arrangement of the Control Circuit
Figure 3- 14 Pin definition of keypad interface
32
-
Chapter 3 Mechanical and Electrical Installation
to the neutral wire of the power supply.
Pin 1: not used
Pin 2: +15V
Pin 3: +15V
Pin 4: 485-
Pin 5: 485+
Pin 6: GND
Pin 7: GND
Pin 8: not used
-