Group E2: Multi-Reference - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive

Group E2: Multi-Reference

The AC drive multi-reference has many functions. Besides multi-speed, it can be used as the
setting source of the V/F separated voltage source and setting source of process PID.
The multi-reference is frequency value and ranges from -b0.00 to b0.00.
As frequency source, it does not require conversion.As others, it needs to be changed to a
percentage relative to b0.00(Max frequency).
Multi-reference can be switched over based on different states of X terminals. For details, see
the descriptions of Group C0.
E2.00
Reference 0
source
E2.01
Reference 0
The descriptions of Reference 1 to Reference 15 are the same with Reference 0(E2.01).
Range: 0~6
0: Set by E2.01
2: AI1 3: AI2
It determines the setting channel of reference 0. You can perform
convenient switchover between the setting channels. When
multi-reference or simple PLC is used as frequency source, the
switchover between two frequency sources can be realized easily.
Range: -b0.00~b0.00
Unit: Hz
Multi-reference 0 set frequency.
E2.02
E2.03
E2.04
E2.05
E2.06
E2.07
E2.08
E2.09
E2.10
E2.11
E2.12
E2.13
E2.14
E2.15
E2.16
Default: 0
1: Set by b2.01,modified via UP/DOWN
4: AI3 5: X6/FI
Reference 1
Reference 2
Reference 3
Reference 4
Reference 5
Reference 6
Reference 7
Reference 8
Reference 9
Reference 10
Reference 11
Reference 12
Reference 13
Reference 14
Reference 15
Chapter 6 Parameters Description
6: PID
Default: 0.00