Group E0: Jog - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive
d6.17
Motor 2
Proportional gain of
flux current loop
d6.18
Motor 2 Integration
time of flux current
loop
d6.19
Motor 2
Proportional gain of
torque current loop
d6.20
Motor 2 Integration
time of torque
current loop

Group E0: JOG

JOG function is useful and convenient for equipment debugging,it can make the AC drive
working at any output frequency temporarily.
E0.00
JOG frequency
E0.01
JOG acceleration
time
E0.02
JOG deceleration
time
These parameters are used to define the set frequency and acceleration/deceleration time
of the AC drive when JOG running.
The JOG command can be sent from Keypad,Terminal and Communication.
The startup mode is "Ramp start from startup frequency" (b1.05 = 0) and the stop mode is
depending
Range: 0 ~ 60000
Proportional gain of flux current loop.
Range: 0 ~ 60000
Integration time of flux current loop.
Range: 0 ~ 60000
Proportional gain of torque current loop.
Range: 0 ~ 60000
Integration time of torque current loop.
Range: 0.00~b0.00
Unit: Hz
Range: 0.1~6000.0
Unit: Sec
The time JOG running from 0Hz to b0.00(Max frequency).
Range: 0.1~6000.0
Unit: Sec
The time JOG running from b0.00(Max frequency) to 0Hz.
on E0.03
Chapter 6 Parameters Description
Default: 2000
Default: 800
Default: 2000
Default: 400
Default: 5.00
Default: 10.0
Default: 10.0
during JOG running.