Group E4: Acc & Dec Time - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive
Group E4: Acc & Dec time
The AC drive provides a total of four groups of acceleration/deceleration time, that is the
following three groups and the group defined by b0.04 and b0.05. Definitions of four groups are
completely the same,see the descriptions of b0.04 and b0.05.You can switch over between the four
groups of acceleration/deceleration time through different state combinations of X terminals. For
more details, see the function No.20 and No.21 descriptions of C0.01.
The descriptions of E4.00~E4.05 are the same with b0.04~b0.05,ranges from 0.1 to 6000.0
seconds,defaults to model dependent.
E4.00 Acceleration time 2
E4.01 Deceleration time 2
Frequency switchover point
between acceleration time 1&2
Frequency switchover point
between deceleration time 1&2
The AC drive can switchover automatically between Acceleration/Deceleration time 1 and 2
with no X terminal signal when setting proper E4.06 or E4.07.In acceleration process,the time 2 will
be used when output frequency is lower than E4.06,otherwise time 1 will be used.In deceleration
process,the time 1 will be used when output frequency is higher than E4.07,otherwise time 2 will be
used.
If any X terminal is set as
20~21 function
(Acceleration/Deceleration
time select),the actual
acceleration/deceleration
time will be determined by X
terminal states.
E4.08
Unit of Acceleration/
Deceleration time
E4.09
Reference frequency
of Acceleration/
Deceleration time
E4.02
E4.03
E4.06
E4.07
输出频率Hz
设定频率
F8.06
Figure 6- 34 Acceleration/Deceleration time 1/2 switching
①
Range: 0~2
0: 1s (second)
Available for acceleration/deceleration time 1 to 4.
①
Range: 0~2
0: Max frequency(b0.00)
Acc/Dec time is defined as the running time needed between 0Hz to
E4.09
Acceleration time 3
Deceleration time 3
Range: 0.00~b0.00
Unit: Hz
See the following figure.
Range: 0.00~b0.00
Unit: Hz
See the following figure.
F8.07
加速时间2
加速时间1
1: 0.1s
1: Current setting frequency
Chapter 6 Parameters Description
E4.04 Acceleration time 4
E4.05 Deceleration time 4
Default: 0.00
Default: 0.00
减速时间2
减速时间1
Default: 1
2: 0.01s
Default: 1
时间t
2: 100Hz